To apply these decals you will need three things. You will need a spray bottle with one drop of dish detergent and the rest water, a decal squeegee and the decal. Make sure the car window is clean. Wipe it with a rag to remove the dust. The decal looks best if it is centered evenly on the passenger side and in approximately the same spot on the other cars around it. Spray the windshield with a light mist and then peel back the decal about a fourth of the way and fold the backing down. Then press the exposed part of the decal on the windshield while simultaneously pulling the rest of the backing off as you use your squeegee to smooth out the front of the decal from one side to the other. The water makes the decal easier to apply smoothly, so squeegee the excess out from left to right and top to bottom. This gets all the air bubbles out. If there appears to be moisture clouding the look do not worry. In a very short while it will evaporate and leave the decal perfectly clear.

For best results do not reuse these decals. These decals last four weeks and then need to be replaced.